Ace DE-GAS Gas Spring Adjuster Tool

Ace DE-GAS Gas Spring Adjuster Tool

Ace Controls
Prices vary - please select product from dropdown

  • £13.80
    Unit price per 


ACE DE-GAS 

Simple, safe and reliable

De-gassing for controlled force reduction on valve gas springs

The reduction  is made by screwing the DE-Gas on the male screwed end of the gas spring. The drain process is possible through light actuation of the push button. If too much nitrogen is discharged, the gas spring can be refilled by ACE.

Adjustment 

1. Hold gas spring valve up 
2. Insert DE-GAS adjuster knob on thread of the valve. 
3. Press the DE-GAS adjuster knob with light hand force until you hear the nitrogen escaping. Press only briefly to avoid too much nitrogen being discharged. 
4. After adjustment, remove the DE-GAS adjuster knob, mount the end fittings and test the gas spring in your application. If necessary repeat the procedure.

 

If you use 2 gas springs in parallel, both gas springs should have the same force to avoid bending forces or side load on the application. If necessary return to ACE to refill both gas springs to the same (average) force. If too much nitrogen is discharged, the units can be returned to ACE for re-gassing. 

 

DE-GAS-5 to be used on a GS-15 Gas Spring 

DE-GAS-8 to be used on a GS-19 or GS-22 Gas Spring 

DE-GAS-10 to be used on a GS-28 Gas Spring

 

Click here to purchase your GS-15, GS-19, GS-22 or GS-28 Gas Springs